Head tube reamer 1 1/8" (34 mm) complete with reamer
Cyclus Tools special tool to face 1 1/8" (34 mm) head tubes.
The head tube reamer creates coaxially exact plane cup seats on the head tube.
max. head tube length: 190mm
max. milling depth: 15mm
max. wall tube thickness: 4 mm
Use
First, remove the conical guide from the spindle.
Insert the tool from above into the head tube of the frame. Put the conical guide on the spindle again and apply pressure with the spring.
Rotate the tool clockwise. Use cutting oil while working. Continue to rotate clockwise, while taking the tool out of the head tube.
Repeat the above steps to ream the bottom side of the head tube.
Tip
Before reaming, remove evetually existing chrome plates on the frame, to avoid early abrasion of the reamer.
After reaming you might need to remove sharp edges with file.
After the use, clean the reamer and keep it in a safe place.
Please be aware that the images and description above are usually supplied by the brand / manufacturer and are in no way affiliated with Cycle Centre Congleton Limited T/A CycleStore. Cycle Centre Congleton Limited T/A CycleStore only resell items from third parties and do not design or manufacture any products.